RE: Switch Tone Volume

Posted by W7TMT on Nov 08, 2008; 5:05am
URL: http://elecraft.85.s1.nabble.com/Switch-Tone-Volume-tp1472807p1472830.html

It works for me. I'm running firmware beta version MCU 2.63 - DSP 1.95. As I crank up the Monitor Level the Switch Tones get louder. (In other words I hold in the Mon/CMP/PWR knob until "MON" followed by its setting number appears and then adjust that setting level and the Switch Tones follow along.) If I reduce the Monitor Tone level to 0 (zero) the Switch Tones can't be heard.

 

Seems to work for SN 1889.

 

73/Patrick
W7TMT
 

---

From: [hidden email] [mailto:[hidden email]] On Behalf Of Roy Morris
Sent: Friday, November 07, 2008 8:49 PM
To: [hidden email]
Subject: [Elecraft] [K3] Switch Tone Volume

I would like to know how the MONitor level is used to change the switch tone volume.  When I change the MON level there is no change.  I have talked with another K3 owner who also says his MON control does not change his switch tone volume either.  We are both using v 2.63 firmware.  Maybe we are overlooking something.  Please let me know if the switch tone volume can be changed, and if so, how.   Presently it is low  and not very audible.  Thanks.  Roy Morris  W4WFB

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com