Posted by
Don Nesbitt on
Nov 08, 2008; 7:16pm
URL: http://elecraft.85.s1.nabble.com/Switch-Tone-Volume-tp1472807p1474530.html
Unfortunately the CW sidetone will also be at the same level and when
switching from speaker to headphones this can get a bit overwhelming!
Sure would be nice to be able to set the volume of each independently or did
I miss something? '73 es gud dxing -- Don N4HH K3/100/KRX3 #83
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of Lyle Johnson
Sent: Friday, November 07, 2008 11:56 PM
To: Roy Morris
Cc:
[hidden email]
Subject: Re: [Elecraft] [K3] Switch Tone Volume
> I would like to know how the MONitor level is used to change the switch
> tone volume...
Go to CW mode, press the CMP|PWR|MON knob until MON is displayed in VFO
B and adjust the level.
Switch tones will be at that level.
73,
Lyle KK7P
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.comNo virus found in this incoming message.
Checked by AVG -
http://www.avg.com
Version: 8.0.175 / Virus Database: 270.9.0/1775 - Release Date: 11/8/2008
9:56 AM
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com