Posted by
Dick Dievendorff on
Nov 11, 2008; 8:51pm
URL: http://elecraft.85.s1.nabble.com/FLx-GN-Adding-Db-gain-tp1330201p1486855.html
This has been corrected in a version of the K3 Utility that is now being
evaluated by Field Test.
0 db is right.
Thanks!
Dick
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of Mike Scott
Sent: Tuesday, November 11, 2008 12:40 PM
To:
[hidden email]
Subject: RE: [K3] [Elecraft] FLx GN Adding Db gain
>There is a table of starting values for each of the crystal filters in the
>K3 Utility Help for the Filter Configuration page.
>Dick, K6KR
Dick I notice that the table from K3 Utility Help (snippet below) does not
show the stock 2.7 KHz filter. I would guess 0 dB but strange that it wasn't
included.
Part Number Bandwidth Gain
KFL3A-200 0.20 kHz 8 dB
KFL3A-250 0.25 kHz 8 dB
KFL3A-400 0.40 kHz 7 dB
KFL3A-500 0.50 kHz 6 db
KFL3A-1.0K 1.00 kHz 1 dB
KFL3A-1.8K 1.80 kHz 2 dB
KFL3A-2.1K 2.10 kHz 2 dB
KFL3A-2.8K 2.80 kHz 0 dB
KFL3A-6K 6.00 kHz 0 dB
KFL3B-FM 13.00 kHz 0 dB
Mike Scott - AE6WA
Tarzana, CA (DM04 / near LA)
K3-100 #508/ KX1 #1311
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com