>I experienced this pinched audio problem this
weekend. Using the current
>beta firmware, I noted severely pinched transmit
audio (using the transmit
>monitor). It occurred on some bands but not all, and
was present sometimes
>on only one of the sidebands (i.e., when switching
sidebands the audio
>pinching was gone, and returned when switched to the
original sideband).
>The problem disappeared upon reboot.
>Steve N9SZ
Steve,
I have had the same problem multiple times; I am glad to
hear someone else has the same problem. People I am talking to say to take the
clothespin off of my nose. In the transmit monitor I can hear thin audio. My
problem is that I don’t know how to replicate the distorted audio problem.
A power off reset fixes it every time when it shows up. I have been
experiencing this problem over many firmware downloads. I suspect there is a
root problem that is rare that stems back to the original firmware. I have
serial number 508 if that helps.
I have engaged Elecraft help [Gary] but I am waiting for the
next instance of the problem. I don’t operate SSB very often so it may be
a while before it happens again. For the record Lyle asked that next time it
happens to change frequency or change transmit audio equalization to force a
new set up of transmit audio chain. Since I received these instructions nothing
has happened on my end so I am still waiting.
The fact that you are changing bands and the problem stays
is an important input. Please keep reporting this issue and I will too when it
happens again.
Mike Scott
AE6WA Tarzana, CA
K3/100 SN508
| Free forum by Nabble | Edit this page |