Re: Questions about ARRL review
Posted by
Don Wilhelm-4 on
Nov 27, 2008; 4:36am
URL: http://elecraft.85.s1.nabble.com/Questions-about-ARRL-review-tp1583996p1584025.html
Doug,
I have never seen a crystal filter that is truly symmetrical. That is
just the "facts of life". The real question is, just how much asymmetry
is the user willing to tolerate. Since this is a roofing filter, and
not the ultimate filter for the K3, I tend to believe that the 5 pole
filter is adequate for my purposes. YMMV.
73,
Don W3FPR
Douglas G. Bonett wrote:
> Table 2 of the ARRL review finally answered my questions about the relative
> performance of the 2700 and 2800 Hz filters at 1 Hz and 2 Hz spacing. The
> results are very impressive. Can someone explain to me why the above/below
> results for these two filters are so disparate at these narrow spacings? The
> review suggests that the observed asymmetry is quite unusual. Is the performance
> of a radio most accurately described by the larger or the smaller of the
> above/below values? Is the asymmetry due to a design problem in the roofing
> filters or something in the K3 circuitry? If the asymmetry could be corrected by
> a change in roofing filter design, would the above/below values both become
> similar to the average of the two values? For instance, would the 94/81 IMD
> values at 1 kH spacing for a redesigned 2800 Hz filter approach 87.5/87.5, which
> would be a truly spectacular result for a radio with a single 2800 Hz roofing
> filter.
>
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com