VGA cable - beware
Posted by
MontyS on
Nov 30, 2008; 3:02pm
URL: http://elecraft.85.s1.nabble.com/VGA-cable-beware-tp1595397.html
I am preparing to install an amplifier on my
K3. To get the ALC signal from the 15 pin DIN plug I was hoping to use a
VGA cable, cut one end off, and wire it up accordingly.
Unfortunately pins 3,4,5,6,7,8 and 11 are all
grounded in the cable. There are 4 shielded wires in the cable and the
ground foil on the outside. So I will have to cut off the offending pins
or spring for a male connector.
Monty K2DLJ
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com