Login  Register

RE: Constant Level Line Out with Monitor

Posted by Mike Short on Jan 03, 2009; 10:42pm
URL: http://elecraft.85.s1.nabble.com/Constant-Level-Line-Out-with-Monitor-tp2104991p2107266.html

The problem I see with that is feedback. Having a speaker and a live mic in
close proximity to each other is an invitation for serious feedback hum.
Think of people that call in to radio programs, there are always a few that
leave the radio on, and have to turn it down.

Mike
 

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of ab2tc
Sent: Saturday, January 03, 2009 2:41 PM
To: [hidden email]
Subject: Re: [K3] [Elecraft] Constant Level Line Out with Monitor


Hi,

I hate to be a wet blanket, but having to listen to myself in the headphones
in order to be able to record the transmitted audio is very tiring. I do not
normally have Monitor on while operating. May I suggest another toggle
feature whereby the Monitor output can be directed to phones/speakers, line
out or both? Another alternative would be to have a separate line out level
for RX and TX audio and leave the Monitor function out of this. Yes, this is
getting complicated but I don't think the current setup will cut it for
people who want to record an entire operating session (ideal for a net
control operator who wants to document his operation for example).


Olivier F5MZN wrote:

>
> Hello again,
>
> Arie Kleingeld PA3A wrote:
>> This feature was recently implemented in the new firmware.
>> Download it and read the release notes.
>> It's all there!
>
> Shame on me, I didn't checked the last BETA releases!
>
> Well, I dreamed it and they did it. Thank you guys!
>
> All the best and 73,
> <snip>
>


-----
AB2TC - Knut
--
View this message in context:
http://n2.nabble.com/Constant-Level-Line-Out-with-Monitor-tp2104991p2106903.
html
Sent from the [K3] mailing list archive at Nabble.com.

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
No virus found in this incoming message.
Checked by AVG - http://www.avg.com 
Version: 8.0.176 / Virus Database: 270.10.1/1870 - Release Date: 1/2/2009
1:10 PM

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com