Re: Front/Rear MIC Input Level
Posted by
Iain MacDonnell - N6ML-2 on
Jan 11, 2009; 8:21pm
URL: http://elecraft.85.s1.nabble.com/Front-Rear-MIC-Input-Level-tp2141584p2142716.html
Dr. Werner Furlan wrote:
> hi Don,
>
> Don Wilhelm schrieb am 11 Jan 2009 um 10:14:
>
>> The correct level depends on your microphone, your voice, and your shack.
>> Put the K3 into TX TEST and talk into the mic - increase the mic gain until
>> your voice peaks produce 7 bars on the ALC scale.
>
> I cannot get 7 bars on the ALC scale whatever I try. When I whistle I can get
> 6 bars, but not with normal voice. Power out is 80 W when I whistle, 100W
> with tune at full power. Microphone is the Heil headset with HC5 element,
> connected to the rear connector with rPH setting.
> Do you think there is something wrong with my K3? I get good reports btw.
Sounds like something's not quite right... I have MIC set to 20 for my
ProSet Plus (either element).
~Iain / N6ML
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com