Posted by
M0XDF on
Jan 28, 2009; 8:20am
URL: http://elecraft.85.s1.nabble.com/Main-vs-Config-Menus-tp2216024p2230922.html
Yes, mine:
PF1 = B->A
PF2 = SPKR+PH (I keep phones in rear, but sometimes just listen
without them)
There are a couple of others I use - VOX GN and ANTIVOX (I haven't
quite got that right yet) that I'd like on PF keys, but as per
previous posts, I want to use M1-M4 and REC buttons for KDVR3, so that
limits me to 2 PF keys.
Still noting what I use most from CONFIG, will probably want to switch
from RF gain to Squelch when I've built using the XV144, could find
myself changing that quite a bit.
And still tweaking ALC, so IF we had an assignable menu, they would
have been on it at present, but not forever.
73 de M0XDF, K3 #174
--
Hofstadter's Law: The time and effort required to complete a project are
always more than you expect, even when you take into account
Hofstadter's
Law.
On 28 Jan 2009, at 07:07, Leigh L. Klotz, Jr WA5ZNU wrote:
> Wayne n6kr wrote:
>> I attempted to make a distinction between "operating" menu entries
>> (MAIN) and "configuration/test" menu entries (CONFIG). It's
>> possible I didn't get this right in some cases, in hindsight. But I
>> have noticed that as the firmware and options near completion, the
>> average operator needs CONFIG menu entries less often.
>>
>> I can move menu entries around if there's a compelling reason. So
>> far I haven't seen one :)
>>
>
> I kept this in mind for a few days and here's my results:
> I've been using two PF keys for MIC and SPKR settings, a suggestion
> I read on the list here.
>
> PF1 (RIF) -> Spkrs 1/2 (toggles nicely)
> PF2 (XIT) -> Mic Sel (Front, Rear)
>
> Once per-mode equalization (TX/RC) is in the firmware (or even if
> it's possible to limit it to SSB modes only) I will not need to use
> Menu or Config in normal operation.
> Leigh/WA5ZNU
> K3#51
> K2#3121
> KX1#712
>
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com