Re: Diversity mode doesn't link VFOs

Posted by Frank R. Oppedijk on Feb 06, 2009; 11:23pm
URL: http://elecraft.85.s1.nabble.com/Diversity-mode-doesn-t-link-VFOs-tp2287009p2287057.html

Vic,

Yes, of course! That's the reason I don't see the VFO B display
change when I move VFO A. Thanks for pointing this obvious issue out to me.

It must have been the tiring week...

Have a good weekend!

73,

Frank PA4N



At 00:17 07/02/2009, Vic K2VCO wrote:

>Frank R. Oppedijk wrote:
>>Hi,
>>I've just installed my KRX3, and it's magic! One thing I noticed, though:
>>The manual says that putting the K3 in diversity mode will link the
>>VFOs (when you mode the VFO A knob). But that doesn't happen. After
>>having put the K3 in diversity mode I must put it in linked mode
>>myself before VFO B tracks VFO A knob movement.
>>Is this a bug, or did I miss an erratum?
>
>Actually, what happens is that in Diversity Mode, VFO A controls
>both receivers. VFO B remains available should you want to use
>SPLIT. Of course, you can't have a dual receive option while
>diversity is in effect, but you *can* operate SPLIT, using REV or
>A/B to check the transmit frequency.
>--
>73,
>Vic, K2VCO
>Fresno CA
>http://www.qsl.net/k2vco

---
drs. ing. F.R. Oppedijk
Avista ICT Consultancy B.V.
Albert Schweitzerlaan 7
1277 BV  Huizen

tel: 035 - 523 09 83
fax: 035 - 523 09 84

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html