Re: K3 Beta firmware rev. 2.82

Posted by Doug Alspaugh on Feb 11, 2009; 2:41pm
URL: http://elecraft.85.s1.nabble.com/K3-Beta-firmware-rev-2-80-Improvements-to-AFSK-A-DATA-A-SSB-AM-FM-DVR-tp2305650p2309015.html

Hi Steve,

Seems to work correctly here even if I exceed the recommended 5  bars of
ALC.



73 Doug N3QW


----- Original Message -----
From: <[hidden email]>
To: <[hidden email]>
Sent: Wednesday, February 11, 2009 9:16 AM
Subject: Re: [Elecraft] K3 Beta firmware rev. 2.82

>
> I installed the new beta last and tested the new output power control. I
> don't see any improvement in PSK31 output power using DATA A mode. I still
> get nearly twice the output power than I have dialed in by the PWR knob.
> In
> the previous firmware, the measure output power in CW modes agreed with
> the
> PWR knob setting, but now the power output in CW is 20-30% higher than the
> setting.
>
> I will try to redo the transmitter gain calibration to see if this helps.
>
> Steve N9SZ
> K3 #1672
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html