Posted by
T Gahagan on
Mar 01, 2009; 12:25am
URL: http://elecraft.85.s1.nabble.com/KDVR3-enable-tp2402714p2402757.html
The newer version of the software should take care of the problem. Check
the Elecraft web site.
73, WA7U
----- Original Message -----
From: "John" <
[hidden email]>
To: <
[hidden email]>
Sent: Saturday, February 28, 2009 5:11 PM
Subject: [Elecraft] [K3] KDVR3 enable
>I finally installed my KDVR3 today, it's been here for a month or so.
> Things went well during the installation. Used an anti static mat and
> wrist strap.
>
> Powered up, radio played normal. Went into config menu to set the
> KDVR3 to nor. All I get is the dreaded "not inst" msg. Cycled the
> power per instructions hoping the K3 would recognize the DVR, no luck.
>
> Is there a certain level of software I need to install? I'm running
> ver.2.38/1.90.
>
> K3 #501, fourth problem......hope it can be resolved. I've already
> sent it back to Aptos twice to spend a little vacation time with it's
> old friends.
>
> Any ideas, other than to take it apart and do'er again?
>
> John
> k7up
> K3, (2)K2's, K1
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html