Posted by Bob Naumann W5OV on Mar 04, 2009; 12:12pm URL: http://elecraft.85.s1.nabble.com/Missed-QSOs-with-N1MM-and-KUSB-tp2417702p2422425.html
My K3 with N1MM does not do anything erratic like this. This is not a
software issue.
Something is wrong in the configuration of this system - perhaps the USB to
RS232 port is defective or the parameters are incorrect.
73,
Bob W5OV
-----Original Message-----
From: [hidden email] [mailto:[hidden email]] On Behalf Of Julian, G4ILO
Sent: Wednesday, March 04, 2009 3:08 AM
To: [hidden email] Subject: Re: [Elecraft] [K3] Missed QSOs with N1MM and KUSB
Ignacy wrote:
>
> When the frequency is changed in N1MM by 500 Hz or so, the callsign in the
> input windows is wiped clean.
> So if the frequency of K3 was changed by 10 KHz but the update in N1MM was
> by 1 Khz/s, anything one typed in one second disappeared the next second.
>
>
That seems like poor software design to me. If it really seems as if the
frequency updates are slow to reach the computer, perhaps you are connecting
to the K3 at a low baud rate. Make sure you are using 38400 to minimize any
delay in updating the frequency from the K3.