Re: Cw Signal Shift with Filter Change
Posted by
Don Wilhelm-4 on
Mar 06, 2009; 5:02pm
URL: http://elecraft.85.s1.nabble.com/Cw-Signal-Shift-with-Filter-Change-tp2436825p2436881.html
Is this something that just happened, or has it possibly always been
there unnoticed? In any case, a change to the BFO frequency of one or
all filters is in order.
The condition should be cured by doing a filter alignment. I highly
recommend using Spectrogram to do that task. See my website
www.w3fpr.com - article on K2 Dial Calibration, the filter alignment
info is in part 3 of that article.
73,
Don W3FPR
KG4UFV wrote:
> I have encountered a problem with my K2. When I change from Filter 1 to
> Filter2 in CW mode the cw signal shifts 600hz down in frequency. Has anyone
> experienced this before?
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html