Re: Power output pot tight on CCW end
Posted by
Don Wilhelm-4 on
Mar 08, 2009; 1:51pm
URL: http://elecraft.85.s1.nabble.com/Power-output-pot-tight-on-CCW-end-tp2444454p2444511.html
Mike,
That often happens if the knob is placed too close to the panel - the
knob rubs on the metal housing that holds the shaft. Try loosening the
knob and moving it out just a bit.
73,
Don W3FPR
Mike-WE0H wrote:
> My power output pot on my K2 is tight turning the last 1/4th until full
> CCW. Is this the way it is supposed to be or? It was that way before I
> installed it. It works but is tight turning at the low <1w range.
>
> Thanks,
> Mike
> WE0H
> K2 S/N 6698
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html