Posted by
w0mu on
Mar 14, 2009; 10:18pm
URL: http://elecraft.85.s1.nabble.com/K3-Manual-change-suggestion-tp2479552p2479636.html
It is also unclear what the real purpose is for the rx ant out. From what I
have been told if I want to share my rx antennas with the two receivers then
I should use a T or splitter and go to each input separately.
I would think that RX Ant Out would allow you to take the RX antenna to
another rig or something.
If I recall correctly was it to be used for some type of flitering?
"A slip of the foot you may soon recover, but a slip of the tongue you may
never get over." Ben Franklin
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of Ken Widelitz
Sent: Saturday, March 14, 2009 3:54 PM
To:
[hidden email]
Subject: [Elecraft] K3 Manual change suggestion
I've been studying the Main/Sub RX Antenna Routing section with an eye
towards how the RX ANT OUT is used. Unless I'm missing something, it isn't
clear in the manual. The answer, YOU NEED TO TURN ON THE RX ANT, is
contained, in a different context, in the following reflector post from
Wayne, which should be integrated into the manual.
73, Ken, K6LA / VY2TT
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html