Posted by
Don Wilhelm-4 on
Mar 15, 2009; 12:37am
URL: http://elecraft.85.s1.nabble.com/Kx1-Z1-Encoder-testing-tp2479809p2479925.html
Burke,
Yes, you can test the encoder and its circuit to the microprocessor with
a DMM.
Measure the voltage from the encoder pins as you slowly rotate the
encoder shaft. The outer two pins in the row of 3 are the ones to
measure. As you rotate the shaft, the voltage should jump between zero
volts and something close to 5 volts. If it does not go to zero, there
is a problem with the encoder.
If the voltage does not go up to the vicinity of 5 volts, look carefully
at RP3 and U1 pins 3 and 4.
If that does not reveal a problem, I can give you some resistance checks
to make too.
73,
Don W3FPR
Burke Jones wrote:
> I am almost done with my KX1. During each test section I have noticed
> that there seems to be a problem. Sometimes turning Z1 changes the
> frequency display but sometimes when you turn it the last 2 digits on
> the display just go back and fourth - like from 1 to 2 then 1 then 2.
>
> I have triple checked the solder connections at Z1.
>
> I am trying to figure out if I might have a faulty Z1 encoder. Can
> anyone tell me how I could use my DMM to test directly at the "leads"
> of the Z1? If so which leads and what should I look for?
>
> Thanks for all your help!!
>
> Burke Jones
> N0HYD
> Http://www.n0hyd.com
>
> Sent from my iPhone
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.237 / Virus Database: 270.11.13/2001 - Release Date: 03/14/09 06:54:00
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html