http://elecraft.85.s1.nabble.com/K3-Manual-change-suggestion-tp2479552p2481853.html
> It is also unclear what the real purpose is for the rx ant out. From what
> I
> have been told if I want to share my rx antennas with the two receivers
> then
> I should use a T or splitter and go to each input separately.
>
> I would think that RX Ant Out would allow you to take the RX antenna to
> another rig or something.
>
> If I recall correctly was it to be used for some type of flitering?
>
>
> "A slip of the foot you may soon recover, but a slip of the tongue you may
> never get over." Ben Franklin
> -----Original Message-----
> From:
[hidden email]
> [mailto:
[hidden email]] On Behalf Of Ken Widelitz
> Sent: Saturday, March 14, 2009 3:54 PM
> To:
[hidden email]
> Subject: [Elecraft] K3 Manual change suggestion
>
> I've been studying the Main/Sub RX Antenna Routing section with an eye
> towards how the RX ANT OUT is used. Unless I'm missing something, it isn't
> clear in the manual. The answer, YOU NEED TO TURN ON THE RX ANT, is
> contained, in a different context, in the following reflector post from
> Wayne, which should be integrated into the manual.
>
>
>
>
>
>
>
> 73, Ken, K6LA / VY2TT
>
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html