Re: K3 Manual change suggestion
Posted by
Dave, G4AON on
Mar 15, 2009; 4:31pm
URL: http://elecraft.85.s1.nabble.com/K3-Manual-change-suggestion-tp2479552p2481948.html
Mike the RX ant out is the same as those RF in/out phono sockets found
years ago on radios like the Icom IC720A. I use mine to feed a second
receiver (Microtelecom Perseus), if you want to feed a second receiver
you will need a ferrite splitter which is easy to make, there are three
ports, one from the RF out, one back to the K3 and the other to the
second receiver. Details halfway down my K3 page at:
http://www.astromag.co.uk/k3/73 Dave, G4AON
================
It is also unclear what the real purpose is for the rx ant out. From what I
have been told if I want to share my rx antennas with the two receivers then
I should use a T or splitter and go to each input separately.
I would think that RX Ant Out would allow you to take the RX antenna to
another rig or something.
If I recall correctly was it to be used for some type of flitering?
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html