Re: C6 4.7pf cap & K60XV option?

Posted by WE0H on Mar 16, 2009; 2:22pm
URL: http://elecraft.85.s1.nabble.com/C6-4-7pf-cap-K60XV-option-tp2484672p2486328.html

Hi Don,

OK I will do that. Couldn't figure out one way or the other so I put the
cap on the bottom side of the header after I installed the header. Guess
it was shunting some signal from where it was supposed to be going...hi
hi...

Thanks much,
Mike
WE0H



Don W wrote:
> Mike,
>
> Yes, remove C6 from the RF board and after that, re-peak the 40 and 60
> meter bandpass filter.
>
> 73,
> Don W3FPR

>
> Mike-WE0H wrote:
>> Was I supposed to remove the C6 (4.7p) cap when I added the K60XV
>> option? I have it soldered on the bottom of the RF board from pin1 to
>> pin 3 of J15.
>>
>> Thanks,
>> Mike
>> WE0H
>> K2 6698

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html