Posted by
Phil LaMarche-2 on
Mar 17, 2009; 7:53pm
URL: http://elecraft.85.s1.nabble.com/A-software-lock-preventing-reverse-mode-tp2493169p2493465.html
I second that motion........
Philip LaMarche
LaMarche Enterprises, Inc.
www.instantgourmetspices.com
www.w9dvm.com
800-395-7795 pin 02
727-944-3226
FAX 727-937-8834
NASFT 30210
K3 #1605
W9DVM
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of Fred Bennett N9TA
Sent: Tuesday, March 17, 2009 3:50 PM
To: Elecraft Email List
Subject: Re: [Elecraft] A software lock preventing reverse mode?
This email group is primarily concerned with solving problems in the use and
enjoyment of Elecraft products. While posts which drag on and on related to
other products may be out of place, this is THE place to post fixes and info
related to making things work. This email reflector has been extremely
helpful to me...and I'm sure others as well. Although I own a K2...not a
K3....I DO use Logic 8.0, so I am somewhat interested in the subject. It is
understandable that those who have no reason to monitor this topic would be
dis-interested. I believe patience is in need here....as the topic YOU are
interested in may be of NO interest to me.
73....de....Fred N9TA
____________________________________________________________________
David Gilbert wrote:
> That's a Logic 8 problem. Please enter my vote against polluting the
> K3 menu with bug fix workarounds for every piece of defective software
> out there.
>
> Dave AB7E
>
>
>
> Gary Smith wrote:
>
>> Hi,
>>
>> When I use Logic 8 there is a nice feature where there is a DX Spot
>> log. This reflects on the air spots and evaluates my database to let
>> me know what is posted that I need on which band for which award.
>>
>> When I click on a call, the K3 automatically goes to what band and
>> mode was posted and even moves the transmit/SPLIT to the DX's
>> listening freq if posted.
>>
>> Almost perfect except for some reason, when engaging this, the
>> command also moves the K3 to listen in the reverse position.
>>
>> I've learned to click on the spot in logic and then press the ALT on
>> the K3 to put the signal to normal but I'd like to be able to have
>> the ability in the config menu to tell the K3 to ignore the REV
>> comand unless physically selected by the ALT button or just to ignore
>> it totally unless I intentionally enable it again.
>>
>> Possibilities?
>>
>> Thanks,
>>
>> Gary
>> KA1J
>> ______________________________________________________________
>> Elecraft mailing list
>> Home:
http://mailman.qth.net/mailman/listinfo/elecraft>> Help:
http://mailman.qth.net/mmfaq.htm>> Post: mailto:
[hidden email]
>>
>> This list hosted by:
http://www.qsl.net Please help support this
>> email list:
http://www.qsl.net/donate.html>>
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net Please help support this email
> list:
http://www.qsl.net/donate.html>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html