Re: Independent Bands (F/W Vers. 3.03)
Posted by
Don Wilhelm-4 on
Mar 18, 2009; 2:24am
URL: http://elecraft.85.s1.nabble.com/Independent-Bands-F-W-Vers-3-03-tp2494897p2495083.html
Bud,
You are attempting to receive with the sub-rx on a frequency that is
higher than the main RX is tuned to.
The low pass filters are selected for the main TX/RX, and any signals at
the higher frequency will be attenuated if you are sharing the antenna
(or ATU) for the sub with the main.
The solution (and what the message is trying to tell you) is to use the
AUX RX input to the sub-RX.
If you plan operation as you are attempting, I suggest you re-wire your
SUB-RX antenna to use the BNC connector rather than the unselected
antenna from the KAT3.
73,
Don W3FPR
Bud Semon N7CW wrote:
> I can't figure out how to monitor 6M with the sub-receiver, using my PR6 and
> 6M antenna on Ant2 (which requires me to have the RX Ant on) and tune on 20M
> with the main receiver. I keep getting the message USE AUX. Re-reading the
> notes, it appears that I can't select this combination or am I missing
> something?
>
>
>
> And the Birdie Buster seems to work great!
>
>
>
> 73, Bud N7CW
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html