Posted by
wayne burdick on
Mar 18, 2009; 2:30am
URL: http://elecraft.85.s1.nabble.com/Independent-Bands-F-W-Vers-3-03-tp2494897p2495094.html
RX ANT is common to both the main and sub receivers. To use it with the
sub receiver, first turn on RX ANT (outside of BSET). This selects RX
ANT for the main receiver. Then go into BSET and tap ANT until you see
MAIN -- that allows the sub receiver to share the MAIN antenna, in this
case RX ANT.
If you want to use RX ANT *only* with the sub receiver, while main is
using ANT 1 or 2, do this:
1. Connect your receive antenna to both RX ANT IN and the sub
receiver's AUX RF BNC jack (under ANT 2) using a 'Y' cable.
2. Select AUX for the sub receiver (BSET, tap ANT until you see AUX).
3. Make sure RX ANT is *not* selected in this case; it simply won't be
connected.
73,
Wayne
N6KR
On Mar 17, 2009, at 7:06 PM, Bud Semon N7CW wrote:
> Thanks for the response Mike. Your suggestion allows me to select
> Ant2 for
> the sub-receiver and Ant1 for the main receiver, but I still can't
> select
> the RX Ant (where the 6M preamp is) for the sub-receiver - it just
> kicks me
> out of the bset menu.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html