Posted by
wayne burdick on
Mar 18, 2009; 10:56pm
URL: http://elecraft.85.s1.nabble.com/K3-V3-03-Two-band-receive-question-tp2499732p2500151.html
Hi Joel,
You can only use VFO B for transmit when you're in split mode, at
present. You found a clever work-around, but I don't recommend doing it
this way. Be sure to monitor your TX signal if you do; the synth or
filters may not be set up correctly on TX.
As someone else already posted, it is possible to get a buffered I.F.
output from the sub receiver, but this has not been tested by Elecraft.
It'll probably work, based on what I read, and we did provide a
connector for it on the sub RX itself.
73,
Wayne
N6KR
Joel R. Hallas wrote:
> A big plus would be to be able to communicate on one band, using the
> VFO B
> for transmit and the sub-receiver for receive,... and then use the main
> receiver IF output to view a second band on the IF connected
> panadapter.
> Since there seems to be no way to get to the sub receiver IF. (?)
>
> The only way that I can seem to get the K3 to transmit on the VFO B
> frequency is in split mode. If I'm in split mode and change the bands
> on VFO
> A, it drops out of split and transmit goes back to VFO A. If I try to
> go to
> split mode while on different bands, it says "split N/A."
>
> I have found a way to do it. If I start up with VFO A and B on the
> same band
> with the sub rcvr on, I can engage split mode and then manually spin
> the VFO
> A dial until I get to the second band. Even with course tuning, this
> takes a
> lot of spinning.
>
> Am I missing something here??
>
> Regards, Joel
> Joel R. Hallas, W1ZR
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
>
---
http://www.elecraft.com______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html