Posted by
Arie Kleingeld PA3A-2 on
Mar 22, 2009; 2:40pm
URL: http://elecraft.85.s1.nabble.com/No-Power-Output-tp2517063p2517163.html
Bill,
Had the same thing once.
Reloaded the firmware and that solved the problem here.
73
Arie PA3A
-----Oorspronkelijk bericht-----
Van:
[hidden email]
[mailto:
[hidden email]] Namens KB1PXD
Verzonden: zondag 22 maart 2009 15:07
Aan:
[hidden email]
Onderwerp: [Elecraft] [K3] No Power Output
Hello everyone,
as of last evening, my K3 is no longer indicating any
power output on the RF meter during transmit. I've
tried both PTT and VOX, as well as 2 different antennas. (dipole & beam)
When selecting "ATU TUNE", I see the RF meter go to 5W as expected, but
the SWR indicator above only displays "- -". I've gone through all the
settings and they look correct. The PWR knob is fully clockwise, I'm
not in test mode, etc., etc. I've sent an email to Elecraft but I
thought I'd check here as well to see if anyone has
seen this behavior.
Thanks,
- Bill
KB1PXD
--
View this message in context:
http://n2.nabble.com/No-Power-Output-tp2517063p2517063.htmlSent from the [K3] mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html