Re: No Power Output

Posted by KB1PXD on Mar 22, 2009; 2:56pm
URL: http://elecraft.85.s1.nabble.com/No-Power-Output-tp2517063p2517202.html

Thanks for the quick response Arie.  I tried upgrading
my firmware from 2.67 to 2.78 but I'm still seeing the
same results. (RF meter remains at 0 when transmitting)

- Bill

Arie Kleingeld PA3A-2 wrote

Bill,

Had the same thing once.
Reloaded the firmware and that solved the problem here.

73
Arie PA3A

-----Oorspronkelijk bericht-----
Van: [e-mail]
[mailto:[e-mail]] Namens KB1PXD
Verzonden: zondag 22 maart 2009 15:07
Aan: [e-mail]
Onderwerp: [Elecraft] [K3] No Power Output



Hello everyone,
as of last evening, my K3 is no longer indicating any
power output on the RF meter during transmit.  I've
tried both PTT and VOX, as well as 2 different antennas. (dipole & beam)
When selecting "ATU TUNE", I see the RF meter go to 5W as expected, but
the SWR indicator above only displays "- -".  I've gone through all the
settings and they look correct.  The PWR knob is fully clockwise, I'm
not in test mode, etc., etc.  I've sent an email to Elecraft but I
thought I'd check here as well to see if anyone has
seen this behavior.  

Thanks,
- Bill
KB1PXD
--
View this message in context:
http://n2.nabble.com/No-Power-Output-tp2517063p2517063.html
Sent from the [K3] mailing list archive at Nabble.com.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[e-mail]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[e-mail]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html