Posted by
w7aqk on
Mar 22, 2009; 4:46pm
URL: http://elecraft.85.s1.nabble.com/No-Power-Output-tp2517063p2517545.html
I apologize if this sounds like I am suggesting the obvious,
but you didn't happen to accidentally put it in "test" mode
did you? Press and hold the right side of the mode button
to return to "operating" mode. Just a thought.
Dave W7AQK
----- Original Message -----
From: "KB1PXD" <
[hidden email]>
To: <
[hidden email]>
Sent: Sunday, March 22, 2009 7:06 AM
Subject: [Elecraft] [K3] No Power Output
>
> Hello everyone,
> as of last evening, my K3 is no longer indicating any
> power output on the RF meter during transmit. I've
> tried both PTT and VOX, as well as 2 different antennas.
> (dipole & beam) When selecting "ATU TUNE", I see the
> RF meter go to 5W as expected, but the SWR indicator
> above only displays "- -". I've gone through all the
> settings
> and they look correct. The PWR knob is fully clockwise,
> I'm not in test mode, etc., etc. I've sent an email to
> Elecraft
> but I thought I'd check here as well to see if anyone has
> seen this behavior.
>
> Thanks,
> - Bill
> KB1PXD
> --
> View this message in context:
>
http://n2.nabble.com/No-Power-Output-tp2517063p2517063.html> Sent from the [K3] mailing list archive at Nabble.com.
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
>
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html