Posted by
John E. Reiser on
Mar 28, 2009; 3:22pm
URL: http://elecraft.85.s1.nabble.com/K3-3-04-Power-Output-After-Tune-tp2547892p2549403.html
I'm having a problem of low power output on SSB on 40 meters. Call for 100
watts, get 50 or less peak on LP-100 watt meter.
Reinstalled FW 3.04, calibrated K3 watt meter, calibrated TX GAIN using the
K3 utility and an OHR 100 watt dummy load. Problem remains.
CW output is OK on all bands, albeit a bit on the low side (around 90 out
when 100 requested).
John, W2GW
K3 384
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]]On Behalf Of Jim - W6VAR
Sent: Friday, March 27, 2009 11:34 PM
To:
[hidden email]
Subject: [Elecraft] [K3] K3 3.04 Power Output After Tune
I updated the firmware to 3.04 last night. Today, after I tune, I get no or
low power out indicated on the RF meter in SSB. Keying down momentarily
restores power in SSB.
Are others experiencing this?
Jim
W6VAR K3 1644
--
View this message in context:
http://n2.nabble.com/K3-3.04-Power-Output-After-Tune-tp2547892p2547892.htmlSent from the [K3] mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html