Posted by hf4me on Apr 03, 2009; 3:20pm URL: http://elecraft.85.s1.nabble.com/KPA-100-D13-Diode-issue-tp2581275p2581320.html
What is the color code on the resister? This will determine if it is "out
of tolerance" or if you have a wrong resister.
73, Jim
----- Original Message -----
From: "Ron Greene" <[hidden email]>
To: <[hidden email]>
Sent: Friday, April 03, 2009 10:14 AM
Subject: [Elecraft] [K2] KPA-100 D13 Diode issue
> I'm nearing completion of my new KPA100 and running the resistance tests
> (manual page 43) which are just prior to the final few steps and the
> last item on that list is diode D13 which is supposed to be >10K.
> However I get 8.5 K measured with two different meters. Every test up
> to this point has been OK. Suggestions?
>
> Ron, N8IB
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] >
> This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html >