Re: KX1 Receiver Alignment

Posted by Don Wilhelm-4 on Apr 11, 2009; 12:00am
URL: http://elecraft.85.s1.nabble.com/KX1-Receiver-Alignment-tp2618208p2618962.html

Ed,

The crystal grounding on X2 thru X5 is designed to allow space for the
batteries.  So that is not the source of your prroblem.

73,
Don W3FPR

EMD wrote:

> Hi Don,
>
> I think I may have found the problem.  When I installed X1 I attached  
> a ground to the top of the crystal.  I used the same technique when I  
> installed X2 through 5.  After rereading the installation portion of  
> the manual I read that the ground should be attached no more than  
> 3/16" from the bottom of the crystal.  Do you think this is the problem?
>
> Thanks
>
> Ed
>  
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html