Re: K3 Kit - foam light blockers
Posted by
Don Wilhelm-4 on
May 01, 2009; 3:41am
URL: http://elecraft.85.s1.nabble.com/K3-Kit-foam-light-blockers-tp2751491p2751590.html
Terry,
The light blockers should ideally stick to the board. If that is not
possible, they should stick to the switch substrate (as close to the
board as possible.
The purpose is to block the light escaping from the ends of the LCD
assembly, so if you get them into position at the ends of the LCD in any
way that makes them stay there, it is correct, and will provide the
proper function. Do not push them down too low - the top surface should
be flush with the top of the LCD.
73,
Don W3FPR
[hidden email] wrote:
> Are the foam pieces supposed to stick down to the second layer of LCD
> or wedged all the way down to the switch substrate?
>
> 73 de Terry KK6T
> K3 #2965
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html