Posted by
K2QI on
May 01, 2009; 4:22pm
URL: http://elecraft.85.s1.nabble.com/K3-Noise-Reduction-tp2742986p2754055.html
Regarding noise reduction and the BHI products; I've noticed that the BHI
ANEM works substantially better than the K3's NR. For whatever reason,
whenever I switch NR on, the band noise seems to get attenuated slightly,
but then reshaped to resemble noise in a tunnel. It's very tiring to listen
too.
Any suggestions?
73 de James K3JPS
Trevor Smithers wrote:
> As far as I'm aware there are two companies that produce this technology
for the amateur
> market, BHI in the UK and Michels-Engineering in Germany. The german unit
is designed
> specifically for the extraction of the speech waveform when surrounded by
noise. BHI is similar
> but works with cw as well.
>
> Here are a couple of links to audio samples of both units in operation
>
http://www.ing-michels.de/audio_demonstrations.html>
http://www.radio.bhinstrumentation.co.uk/html/demonstration.html>
> There is a downside to using these units in that they only work with a
mono input so you loose the
> binaural function. To get around this I purchased two of the internal
modules (DX21) from
> Michels-Engineering and wired them to each stereo channel. This allows
independent control of
> the noise reduction in each ear and retains the AFX/binaural function.
>
> 73
> Trevor G0KTN
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
--... ...-- -.. . .--- .- -- . ...