Re: KX1 initial LCD test

Posted by Craig Rairdin on May 02, 2009; 3:21pm
URL: http://elecraft.85.s1.nabble.com/KX1-initial-LCD-test-tp2768339p2769244.html

U1 appears to be the wrong part. It should say "KX1 1.02".

Craig
NZ0R

K3/100 #25
K2/100 #4941
K1 #1966
KX1 #1499

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Mike KB4WJA
Sent: Saturday, May 02, 2009 9:43 AM
To: [hidden email]
Subject: [Elecraft] KX1 initial LCD test


When I power up on the initial board test, I get only two backward h's in
the
right portion of the LCD.

Any idea what the problem is?  I went back over the work and reheated solder
joints.  I went through the manual again checked that I had instsalled all
to this point. U1 seems
to be seated okay in the holder.
http://n2.nabble.com/file/n2768339/P5010129.jpg 


Thanks,

Mike
K1 SN #150
--
View this message in context:
http://n2.nabble.com/KX1-initial-LCD-test-tp2768339p2768339.html
Sent from the Elecraft mailing list archive at Nabble.com.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html