Thanks Craig. It was the only 28 pin IC included. I wonder what the XV 1.6e designation is? I guess I will find out soon…
73,
Mike
-----Original Message-----
From: Craig Rairdin (via Nabble)
[mailto:[hidden email]]
Sent: Saturday, May 02, 2009 11:23
AM
To: Mike KB4WJA
Subject: Re: [Elecraft] KX1
initial LCD test
U1
appears to be the wrong part. It should say "KX1 1.02".
Craig
NZ0R
K3/100 #25
K2/100 #4941
K1 #1966
KX1 #1499
-----Original Message-----
From: elecraft-bounces@...
[mailto:elecraft-bounces@...] On Behalf Of Mike KB4WJA
Sent: Saturday, May 02, 2009 9:43 AM
To: elecraft@...
Subject: [Elecraft] KX1 initial LCD test
When I power up on the initial board test, I get only two backward h's in
the
right portion of the LCD.
Any idea what the problem is? I went back over the work and reheated
solder
joints. I went through the manual again checked that I had instsalled all
to this point. U1 seems
to be seated okay in the holder.
http://n2.nabble.com/file/n2768339/P5010129.jpg
Thanks,
Mike
K1 SN #150
--
View this message in context:
http://n2.nabble.com/KX1-initial-LCD-test-tp2768339p2768339.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@...
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@...
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
This
email is a reply to your post @ http://n2.nabble.com/KX1-initial-LCD-test-tp2768339p2769244.html
You can reply by email or by visting the link above.
Free forum by Nabble | Edit this page |