Posted by
Craig Rairdin on
May 02, 2009; 4:04pm
URL: http://elecraft.85.s1.nabble.com/KX1-initial-LCD-test-tp2768339p2770095.html
"XV 1.6e" is a transverter part. I bet it got tossed into the wrong bin in
the kitting area. I'm sure Elecraft will send you a replacement on Monday if
you ask.
The good news is it lights up, so power must be getting to at least some of
the parts. :-)
Craig
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of Mike KB4WJA
Sent: Saturday, May 02, 2009 10:31 AM
To:
[hidden email]
Subject: Re: [Elecraft] KX1 initial LCD test
Thanks Craig. It was the only 28 pin IC included. I wonder what the XV
1.6e designation is? I guess I will find out soon.
73,
Mike
-----Original Message-----
From: Craig Rairdin (via Nabble)
[mailto:
[hidden email]]
Sent: Saturday, May 02, 2009 11:23 AM
To: Mike KB4WJA
Subject: Re: [Elecraft] KX1 initial LCD test
U1 appears to be the wrong part. It should say "KX1 1.02".
Craig
NZ0R
K3/100 #25
K2/100 #4941
K1 #1966
KX1 #1499
-----Original Message-----
From: elecraft-bounces@...
<
http://n2.nabble.com/user/SendEmail.jtp?type=node&node=2769244&i=0>
[mailto:elecraft-bounces@...
<
http://n2.nabble.com/user/SendEmail.jtp?type=node&node=2769244&i=1> ] On
Behalf Of Mike KB4WJA
Sent: Saturday, May 02, 2009 9:43 AM
To: elecraft@...
<
http://n2.nabble.com/user/SendEmail.jtp?type=node&node=2769244&i=2>
Subject: [Elecraft] KX1 initial LCD test
When I power up on the initial board test, I get only two backward h's in
the
right portion of the LCD.
Any idea what the problem is? I went back over the work and reheated solder
joints. I went through the manual again checked that I had instsalled all
to this point. U1 seems
to be seated okay in the holder.
http://n2.nabble.com/file/n2768339/P5010129.jpg
Thanks,
Mike
K1 SN #150
--
View this message in context:
http://n2.nabble.com/KX1-initial-LCD-test-tp2768339p2768339.htmlSent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:Elecraft@...
<
http://n2.nabble.com/user/SendEmail.jtp?type=node&node=2769244&i=3>
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:Elecraft@...
<
http://n2.nabble.com/user/SendEmail.jtp?type=node&node=2769244&i=4>
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html _____
This email is a reply to your post @
http://n2.nabble.com/KX1-initial-LCD-test-tp2768339p2769244.htmlYou can reply by email or by visting the link above.
--
View this message in context:
http://n2.nabble.com/KX1-initial-LCD-test-tp2768339p2769414.htmlSent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html