http://elecraft.85.s1.nabble.com/K3-on-channel-strong-signal-overload-tp2785612p2788108.html
>
> I have had some similar observations on ten meters. After reading your
> report I am inclined to agree with you. I have a station about 5 miles
> away who I contact on a regular basis on 10 meters, both SSB and CW. He
> is usually very distorted here and I have not been able to understand
> because others on the net do not seem to observe the distortion. I have
> also heard a few stations with strong skip that seem the same way. I have
> not tried a different antenna, but turning off the pre-amp helps some and
> engaging the attenuator helps even more.
>
> It makes sense to me that the front end overload clipping is activating
> and distorting the signal. It may not be such a problem now that I think
> I understand what is going on.
>
> Willis 'Cookie' Cooke
> K5EWJ
>
>
> --- On Sun, 5/3/09, orbarrett <
[hidden email]> wrote:
>
>> From: orbarrett <
[hidden email]>
>> Subject: [Elecraft] K3 on-channel strong signal overload?
>> To:
[hidden email]
>> Date: Sunday, May 3, 2009, 9:39 PM
>> Hello all,
>>
>> I just finished operating my K3 from my friend's
>> driveway using a portable
>> dipole on 60M, and wanted to inquire about some incoming
>> signal overload
>> that cropped up. I was joined while ragchewing with some
>> friends on 5371.5
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html