Re: K3 ATU BYPASS

Posted by Vic K2VCO on May 06, 2009; 7:41pm
URL: http://elecraft.85.s1.nabble.com/K3-ATU-BYPASS-tp2823808p2823925.html

Bill Johnson wrote:
> I have checked the manual and archives before asking this question;  is the
> ATU out of circuit when the BYP is enabled, or are the last settings for
> lowest SWR left in?

Neither. It's set to compensate for internal stray reactances for the best match to a
50-ohm load.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html