Posted by
K2QI on
May 10, 2009; 8:35pm
URL: http://elecraft.85.s1.nabble.com/K3-timeout-tp2851955p2859892.html
Hi Dave,
Yes, I'm running HRD. Now that I think about it, both occasions the VFO
froze, I do believe I had HRD running and connected to the K3.
I've unplugged the control cable and turned the K3 on to see if I can
duplicate the problem. If not, I suppose I could attribute it to an HRD or
USB setting. I'll report back with my findings shortly.
73 de James K3JPS
_____
From: David Gilbert [mailto:
[hidden email]]
Sent: Sunday, May 10, 2009 4:08 PM
To: James Sarte
Cc:
[hidden email]
Subject: Re: [Elecraft] K3 timeout??
Are you using any kind of rig control software?
Dave AB7E
James Sarte wrote:
Anyone?
Just wondering if this was always the way it was, or there's something I
might have changed?
73 de James K3JPS
_____
From: James Sarte [mailto:
[hidden email]]
Sent: Saturday, May 09, 2009 8:01 PM
To: '
[hidden email]'
Subject: K3 timeout??
Dear all,
I've recently noticed that if I leave the K3 on for some time (perhaps 10
minutes or more; I never verified), the VFO knob becomes inactive. In other
words, spinning it will not change the frequency unless another button is
pressed first. So far I've been able to "un-freeze" the VFO by hitting the
lock button or the microphone key. I've never noticed this behavior before.
Is it something new?
73 de James K3JPS
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
--... ...-- -.. . .--- .- -- . ...