Login  Register

Re: K3 - Data A pitch

Posted by Steve Ellington on May 11, 2009; 10:05pm
URL: http://elecraft.85.s1.nabble.com/K3-Data-A-pitch-tp2865591p2865730.html

But if you do that, you won't be able to take advantage of your narrow
filters for PSK31 etc. because your filter will fall outside the passband.
Looks to me like you better leave your FC where it is at 1500 Hz unless you
like hearing wide spectrum and don't mind the QRM.
Steve Ellington
[hidden email]
----- Original Message -----
From: "Lyle Johnson" <[hidden email]>
To: <[hidden email]>
Cc: <[hidden email]>
Sent: Monday, May 11, 2009 5:40 PM
Subject: Re: [Elecraft] K3 - Data A pitch


>> Seen this asked before but without response so does anyone know if it's
>> possible to change the centre frequency of the audio in Data A?
>
> Yes, just set the SHIFT and WIDTH controls to your liking.
>
>> Also my (old) manual suggests you should be able to use the dual passband
>> filter for rtty while in Data A but I assume this was a mistake?
>
>
> DATA:FSK or DATA:AFSK only.
>
> 73,
>
> Lyle KK7P
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html