Re: K3 Power supply
Posted by
Jan Erik Holm on
May 12, 2009; 3:25am
URL: http://elecraft.85.s1.nabble.com/K3-N1MM-for-Field-Day-tp2864853p2867011.html
Sorry but this is totally wrong. In this case your FT-1000D
was either broken or not aligned properly.
If you still have it align it per the service manual and
you will see something totally different.
73 Jim SM2EKM
------------------------------
Erik N Basilier wrote:
> Merv,
>
> My experience with the FT-1000D was that the S-meter didn't start to move
> until the actual signal strength reached S-5 or so. But yes, I believe you
> when you say that the switching power supply creates a lot of noise, and the
> one in the FT-1000D doesn't.
>
> 73,
> Erik K7TV
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html