K3 Hardly any Output
Posted by
Thomas J. Hoedjes on
May 14, 2009; 2:59pm
URL: http://elecraft.85.s1.nabble.com/K3-Hardly-any-Output-tp2892252.html
Hello
Turned my K3 on this afternoon only to find out it has only about 10 Watts output on full 120 scale..
reset, restored, nothing changed..
Did the whole alignment to find out that on all bands with the 5 watt tx alignment i can get any higher as 2.7 till 2.8 is goes up a very short time and comes back to 2.7
Tx Alignmnet with the Utility gave err txg error..
K3 was functioning 100% couple of weeks ago....
Also with the 3.11 fw
Any help??
PS this is the second K3 i have in hand with the same problem
Both i could not solve sofar...
73
Tom mailto:
[hidden email]
--
73's
Tom mailto:
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html