Re: Tr: K3 Ref connector
Posted by
David Pratt on
May 16, 2009; 7:03am
URL: http://elecraft.85.s1.nabble.com/Tr-K3-Ref-connector-tp2911559p2911715.html
The connector is referred to on page 17 of the latest K3 Owner's Manual
and my K3 rear panel is labelled "REF."
In consequence, I have bought a Racal-Dana 9474 Rubidium Frequency
Standard which is now poised to plug in as soon as the KREF3-EXT is
available, hopefully quite soon.
73
David
In a recent message, Dave G4AON <
[hidden email]> wrote ...
>
>The REF input connector is for an external reference that was mentioned
>way back, just like synchronous AM and TCXO additional temperature
>compensation to 0.5 ppm, it seems to be getting pushed back by new
>add-ons such as the internal 2m transverter card. Elecraft do not
>publish a K3 project plan showing roll out dates for items that were in
>the original specification, so don't hold your breath waiting for the
>REF input board.
>
>73 Dave, G4AON
>K3/100 #80
>------------------------
>What is the connector for, and can I plug a 10MHz reference to it?
--
David G4DMP
Leeds, England, UK
------
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html