Re: K3 144mhz power - 10 watts not a problem
Posted by
Mike Harris-9 on
May 17, 2009; 3:26pm
URL: http://elecraft.85.s1.nabble.com/K3-144mhz-power-tp2892141p2917764.html
Cascading IPs maybe if you're running an intermediate amp to drive the big
one.
Regards,
Mike VP8NO
----- Original Message -----
From: "Jim Miller KG0KP" <
[hidden email]>
To: "Elecraft Reflector" <
[hidden email]>
Sent: Sunday, May 17, 2009 12:33 AM
Subject: Re: [Elecraft] K3 144mhz power - 10 watts not a problem
|I don't see 10 watts as a problem. How many 2 meter amps do you have on
the
| shelf just waiting to be used again? 40 w 15 years old ($90 new then),
two
| converted police amps (ugly but they work well) both run over 85 watts
| continuous with 5 watts in ($50) at hamfests if there any still around)
and
| a 140 w that takes 2 watts drive for full power and the other is a 160 w
| that runs full output at 35 watts and over half of that from an ht
(don't
| remember exactly how much). 10 watts a problem? - i just don't see it.
|
| Lots of external amps out there.
| 73, Jim KG0KP
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html