Re: K3 KNOBS

Posted by WILLIS COOKE on
URL: http://elecraft.85.s1.nabble.com/K3-KNOBS-tp2929921p2933755.html


Posts like this are no doubt well intentioned and good advice in general.  For these knobs with built in stress cracks normal care is not adequate.  Use the short handle for leverage, just tighten barely enough that the knob does not slip on the shaft, expect the knob to fail while you are adjusting the knob at some point in the future.  If can keep spare knobs on hand.  Elecraft are taking steps to get us better knobs and I am confident they will succeed soon and do something that is appropriate, but it takes a while to accomplish these design changes.  I am sure they will let us know soon.

But don't assume that those of us who have had failures are ham-fisted klutzes who don't take normal precautions.  That could be the case sometimes, but certainly not the general situation in this case.

Willis 'Cookie' Cooke
K5EWJ


--- On Mon, 5/18/09, Tim Heasman <[hidden email]> wrote:

> From: Tim Heasman <[hidden email]>
> Subject: Re: [Elecraft] K3 KNOBS
> To: [hidden email]
> Date: Monday, May 18, 2009, 6:42 AM
> Hi,
>
> My advice is not to use the long lever end of the hex key,
> insert the long
> end in the grub screw.
>
> 73
>
> Tim
>
> gm4lmh
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list:
> http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html