Posted by
Alexandr Kobranov on
URL: http://elecraft.85.s1.nabble.com/K144XV-info-tp2945666p2951096.html
Hello friends,
after some local discussions with Jan, OK2TT, and others intersted in
using K144XV as a "driver" for higher bands transverters there are
some questions:
1) what about supported frequency range? We are using mostly 146 to
148MHz as I/F frq from transverter(-s) so we hope it will be no
problem with new 2m module.
2) What about possibility to have a +TX signal (9 - 12V) on BNC
(central pin) as most of transverters today are using this system of
T/R switching (mostly DB6NT production line). (It is as basic option,
for more complex system external sequencing needed but in typical FD
configuaration it is enough.)
Any comments?
Thanks,
73!
Lexa, ok1dst
K3/10 #727
wayne burdick napsal(a):
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html