Re: K144XV info

Posted by wayne burdick on May 21, 2009; 4:11pm
URL: http://elecraft.85.s1.nabble.com/K144XV-info-tp2945666p2952789.html


On May 21, 2009, at 2:55 AM, Alexandr Kobranov wrote:

> Hello friends,
>
> after some local discussions with Jan, OK2TT, and others intersted in
> using K144XV as a "driver" for higher bands transverters there are
> some questions:
>
> 1) what about supported frequency range? We are using mostly 146 to
> 148MHz as I/F frq from transverter(-s) so we hope it will be no
> problem with new 2m module.

The K144XV uses a 6-m IF, so it covers 144-148 MHz.

>
> 2) What about possibility to have a +TX signal (9 - 12V) on BNC
> (central pin) as most of transverters today are using this system of
> T/R switching (mostly DB6NT production line). (It is as basic option,
> for more complex system external sequencing needed but in typical FD
> configuaration it is enough.)

We're looking into this.

73,
Wayne

---

http://www.elecraft.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html