Re: K3 Power Amp Shut Down Problem

Posted by wayne burdick on
URL: http://elecraft.85.s1.nabble.com/K3-Power-Amp-Shut-Down-Problem-tp2959862p2962467.html

Hi Don,

You're right: "HI SWR" is a transitory message. It should probably
switch to a permanent message ("ERR SWR"), requiring a switch tap to
clear, if the conditions persists long enough to force a drop into QRP
mode.

73,
Wayne

On May 22, 2009, at 6:34 PM, Don Nelson wrote:

> Wayne,
>
> Thank you for your response.
>
> I do believe that the K3 cut power because the SWR on the antenna port
> went too high. No I never saw any error message at any time. And that
> is
> my point and basis for the request to have an error message for this
> condition. Scanning the list of error messages on page 64 of the user
> manual dated January 2009, I do not see any error message that states
> that the SWR was detected to be too high.
>
> Please let me know if you do implement such an error message.

---

http://www.elecraft.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html