Re: KUSB+Logger32

Posted by Ignacy on
URL: http://elecraft.85.s1.nabble.com/KUSB-Logger32-tp2966594p2968624.html

Initially Logger32 was was locking all the time when I used KUSB. Downloads from the chip manufacturer did not help. Then some 2 months ago Elecraft posted a new driver, I downloaded it, and everything is fine ever since.  This is under Vista.

Mike Harris-9 wrote

G'day,

Tried using my KUSB today.  Loaded latest driver and all communicates well
between K3 Utility and K3.  I modified the power on banner OK.

Changed the com port in Logger32 to the same and after the first read of
frequency Logger32 freezes and needs the three finger salute.  CPU seems
to be running at 100%

K3+RS232+Logger32 can be running OK.  Change over to KUSB, change the com
port in Logger32 and it freezes.

KUSB plugged into any USB port on the PC not via a hub.

Changed the port speed for both K3 and KUSB from 38400 to 9600 no change.

Anyone else seen this?

Regards,

Mike VP8NO

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[e-mail]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html