Re: KUSB+Logger32
Posted by
N5WNG on
URL: http://elecraft.85.s1.nabble.com/KUSB-Logger32-tp2966594p2969289.html
Mike,
I have been using Logger32 for about 10 years and have had virtually no issues. I currently have 3 USB to serial adapters running on my PC, one for the Yaesu and two connected to the K-3, one for reading the data from the radio into Logger32, the other for the Logger32 CW keyer. At this moment CPU usage is running 2-7% with both Logger32 running and LP-Bridge running. PC is running XP and is a dual core Intel machine. Hope this helps.
Mike -N5WNG
Mike Harris-9 wrote
G'day,
Tried using my KUSB today. Loaded latest driver and all communicates well
between K3 Utility and K3. I modified the power on banner OK.
Changed the com port in Logger32 to the same and after the first read of
frequency Logger32 freezes and needs the three finger salute. CPU seems
to be running at 100%
K3+RS232+Logger32 can be running OK. Change over to KUSB, change the com
port in Logger32 and it freezes.
KUSB plugged into any USB port on the PC not via a hub.
Changed the port speed for both K3 and KUSB from 38400 to 9600 no change.
Anyone else seen this?
Regards,
Mike VP8NO
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:Elecraft@mailman.qth.net
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html