Re: K3 Assembly Question

Posted by Don Wilhelm-4 on
URL: http://elecraft.85.s1.nabble.com/K3-Assembly-Question-tp2978980p2979088.html

Dave,

Those pieces of equipment are entirely "optional".  They are not
required at all.  In fact the 1 mW level is only used if you include the
KXV3 option.

The Power Meter can be used to obtain more accurate power calibration
(but the K3 does a good job of it without that meter), and the signal
generator is only used to obtain precise adjustment of the S-meter
response - again, the stock S-meter response is adequate for most
purposes - if you want a truly calibrated S-meter, then the generator
can be used - the Elecraft XG2 will do that job nicely.

73,
Don W3FPR

Dave, W8OV wrote:

> I'm considering ordering a K3 kit soon.  I wonder how 'optional' these
> items listed in the assembly manual really are:
>
> Optional Equipment:
> 1.  RF Power Meter with accurate readout from 1 mW to 5 watts, minimum.
> 2.  Signal generator with calibrated 50 uV output at 20 or 40 meters.
>
> I have a Bird 43 wattmeter, but don't know of any element in the HF
> range that would read 1 mW.
>
> --Dave, W8OV
>  
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html